Notes · Class 10 · CBSE Science

Electricity notes

Revision notes for the chapter: the key points, definitions and exam tips to remember.

Electricity is the flow of electric charge. Current flows in a closed circuit.

KEY QUANTITIES

  • Charge Q: unit coulomb (C). One electron = 1.6 × 10⁻¹⁹ C.
  • Current I = Q/t; unit ampere (A). Measured with an ammeter in series.
  • Potential difference V = W/Q; unit volt (V). Measured with a voltmeter in parallel.
  • Ohm's law: V = IR at constant temperature. Resistance unit: ohm (Ω).
  • Resistance R = ρL/A — increases with length, decreases with area. ρ = resistivity (depends on material). Alloys (nichrome) have high resistivity → used in heaters.

COMBINATIONS

  • Series: R = R₁ + R₂ + R₃; same current everywhere; voltage divides.
  • Parallel: 1/R = 1/R₁ + 1/R₂ + 1/R₃; same voltage across each; current divides. Household wiring is parallel so each appliance works independently.

HEATING EFFECT

  • Joule's law: H = I²Rt.
  • Uses: heater, iron, toaster, bulb filament (tungsten, high melting point), fuse (low melting point, in series).

POWER

  • P = VI = I²R = V²/R; unit watt (W).
  • Energy = P × t. 1 kWh = 3.6 × 10⁶ J = 1 unit of electricity.

REMEMBER

  • Current flows from + to − (conventional current); electrons move the other way.
  • Effective resistance in parallel is less than the smallest resistance.
  • V–I graph for an ohmic conductor is a straight line through the origin; slope = R.
Memory hook: "VIR — Very Important Rule: V = IR."

Electricity: practice questionsElectricity cheat sheet

More Class 10 · CBSE Science notes

Practise Electricity

Sign up free to practise the full chapter after revising. Questions you get wrong come back until you've mastered them.

Start practising free

Free to start · No credit card needed