Notes · Class 11 · CBSE · Science Physics
Mechanical Properties of Solids notes
Revision notes for the chapter: the key points, definitions and exam tips to remember.
Solids deform under force and recover if the force is within the elastic limit.
STRESS AND STRAIN
- Stress = restoring force / area (N/m² or Pa). Types: tensile, compressive, shearing, hydraulic.
- Strain = change in dimension / original dimension (no unit). Longitudinal, shearing, volumetric.
HOOKE'S LAW
- Within the elastic limit, stress ∝ strain; stress = modulus × strain.
STRESS–STRAIN CURVE
- Proportional limit → elastic limit (yield point) → plastic region → ultimate tensile strength → fracture point.
- Ductile materials have a long plastic region; brittle materials break soon after the elastic limit.
- Elastomers (rubber) have no linear region.
MODULI OF ELASTICITY
- Young's modulus Y = (F/A) / (ΔL/L) — for length. Steel has a higher Y than rubber (steel is more elastic).
- Shear modulus G = (F/A) / θ.
- Bulk modulus B = −p / (ΔV/V). Compressibility = 1/B.
- Poisson's ratio = lateral strain / longitudinal strain.
APPLICATIONS
- Cranes use thick steel ropes; bridge beams are I-shaped; mountains can't exceed about 10 km height because rocks at the base would flow.
Memory hook: "Stretch it, it pulls back — until the elastic limit."
Mechanical Properties of Solids: practice questionsMechanical Properties of Solids cheat sheet
More Class 11 · CBSE · Science Physics notes
Practise Mechanical Properties of Solids
Sign up free to practise the full chapter after revising. Questions you get wrong come back until you've mastered them.
Start practising freeFree to start · No credit card needed