KTUYSBeta
Log inSign up

Cheat sheet · NEET Preparation Physics

Mechanical Properties of Solids cheat sheet

The whole chapter on one page: key formulas, facts and the points to remember, for quick revision before a test.

NEET · Physics

Cheat sheet

Class 11 · Chapter 8Mechanical Properties of Solids

Stress ∝ strain within the elastic limit — Hooke's law.

1. Stress & Strain

Stress=FA\text{Stress} = \dfrac{F}{A}Strain=ΔLL\text{Strain} = \dfrac{\Delta L}{L}

Stress has units of N m⁻² (Pa); strain is dimensionless.

2. Elastic Moduli

ModulusFormulaApplies to
Young's (Y)F/AΔL/L\dfrac{F/A}{\Delta L/L}solids (length)
Bulk (B)−pΔV/V-\dfrac{p}{\Delta V/V}solids, liquids, gases
Shear (G)F/Aθ\dfrac{F/A}{\theta}solids only

Compressibility k=1/Bk = 1/B. Poisson's ratio = lateral strain / longitudinal strain.

3. Stress–Strain Curve

  • Proportional limit → elastic limit → yield point → ultimate stress → fracture.
  • Ductile: large plastic region (copper). Brittle: fracture soon after elastic limit (glass).
  • Elastomers (rubber) have no proportional region.

4. Energy Stored

U=12×stress×strain×volumeU = \tfrac12 \times \text{stress}\times\text{strain}\times\text{volume}

Applications: cranes' ropes, beams with I-section, bridges.

5. Key Points

  • Steel is more elastic than rubber (larger Y).
  • Y depends on material, not dimensions.
  • Shear modulus ≈ Y/3 for most solids.
  • Beam sag ∝ 1/(b d³): depth matters most.

Remember: Y, B, G | Hooke's law | stress–strain curve

Mechanical Properties of Solids: questions and notes

More NEET Preparation Physics cheat sheets

Practise Mechanical Properties of Solids

Sign up free to practise the full chapter. Questions you get wrong come back until you've mastered them.

Start practising free

Free to start · No credit card needed